Master the production and manufacturing of terminal wire, and ensure that the quality of the electrode connecting wire is familiar with the four process processes that must be understood, such as cutting, peeling, pressing the terminal, dipping tin, and other processing processes (automatic dispenser, soft cloth, button wire)
Thread cutting
The required length of the wire rod shall be cut by the wire cutting machine. The automatic technology wire cutting machine shall be used to cut the wire rod. The peeling length deviation shall not exceed ± mm.
Peeling
It is necessary to adjust the head of the peeling machine to molt the wire.
Voltage terminal
The willow pressing process is selected to inspect the insulating layer skin inspection window, the type of end type, the shape and pressure of brush tail type, and the brush tail inspection window.
Wetting
Apply the temperature-controlled tin circuit to solve the problem of tinning at the end of the wire.
Automatic dispensing machine
Apply UV glue automatic dispenser to heat up the glue and wipe it on the RF connector with the terminal plugged in. The RF connector is firm for structural reinforcement, and then send it into the barrel barbecue box to carry out structural reinforcement.
Kink line
Twisting will improve the anti-interference ability of the cable, and the application of automatic crimping machine, the development of crimping, and the scope of crimping must exceed the terminal 1CM-2CM.