How to choose the right wire-to-board connector: People who are always in the industry know that wire-to-board connectors will be used at work, but what kind of connectors meet our requirements and require us to carefully select.

1. We have to think about how many wires we need to connect. What are the specifications of the wiring?
Don't underestimate such a small problem. He decides which connector we use for the right rubber core. In our actual selection process, there are hundreds of rubber cores to choose from, how to choose, and our installation space. And the voltage requirements have a negligible relationship.

2. the type of socket should also be considered.
Wall-type sockets are suitable for sockets or panel sockets when they are penetrated into the wall. They have the advantage of saving space and are generally used when no accessories need to be added.

3. the same connector has different functions, how to deal with it.
On the same panel, when four sockets are needed, one of them carries high current, and the other is carrying current. When this is not clear, it will destroy our expensive equipment. How to do? It is necessary to order the same type of core arrangement at different angles from the standard. The key positions of these arrangements are different, which will prevent the mismatch of the plug and socket.

4. the type of plug.
Usually we use straight plugs, but in special cases, use right angle plugs, that is, enter the device at right angles.

5. the choice of accessories after the plug.
When selecting the wire-to-board connector, the choice of the rear attachment of the plug is a straight plug or a right-angle plug. There are integral or separate tail attachments. The integrated strength is very good, and the separate type can quickly check the welding points.